Operating Tips:

Gear Head Precision Gap-bed Lathe (CL-410, CL-410V, CL-460, CL-460V)


  • Triple bearings supporting headstock spindle.
  • Adjustable taper roller bearings providing spindle accuracy.
  • Precision 'V'-beds & headstock gears are all hardened & ground.
  • One piece cast iron base increases rigidity.
  • Overload protection on drive motor and coolant system.
  • Universal enclosed gearbox incorporating metric & imperial thread capabilities.
  • Inching button incorporated on the control panel for convenient spindle speed selection.
  • Foot operated spindle brake with safety cut out switch.
  • 300mm wide induction hardened heavy duty cast iron bed.
  • Removable gap bed allowing work piece to swing up to 690mm.
  • Chuck guard fitted with safety micro switch.
  • Powered longitudinal and cross feeds.
  • Adjustable 4 position length-stop mechanism for accurate repetitive operation.
  • Micro adjustable saddle stop.
  • Dual calibrated dials incorporating metric & imperial graduations.
  • Coolant system with flexible hose enabling operator to manipulate flow direction.
  • Oil sight glass for head stock and gearbox.
  • Low voltage halogen work light.
  • Lubrication pump on saddle oiling slides.
  • D1-6 camlock spindle for quick chuck removal.
  • 12 spindle speeds from 25-1600rpm .
  • ForCL-410V/CL-460V,  spindle speeds is stepless in two grades: 30-600/600-3000rpm.
  • Large 58mm spindle bore, 80mm spindle bore is optional.


Standard Accessories:
3 jaw chuck, 4 jaw chuck, Face plate, Steady rest, Follow rest, Dead center, Oil gun, Coolant system, Working light, General tools, Foundation bolts, Operation manual (English edition)

Optional Accessories:
2, 3-axes DRO, Quick change tool post, Taper turning attachment, CE execution

Main Technical Features

Specification CL-410/CL-410V CL-460/CL-460V
Swing over bed 410mm(16") 460mm(18")
Swing over cross slide 220mm(8-13/16") 270mm(10-3/4")
Swing in gap diameter 640mm(25-1/8") 690mm(27-1/8")
Distance between centers 1000mm(40") 1500mm(60") 2000mm(80") 1000mm(40") 1500mm(60") 2000mm(80")
Valid length of gap 165mm(6-1/2")
Width of bed 300mm(11-13/16")
Spindle nose D1-6
Spindle bore 58mm(2-1/4")
Taper of spindle bore No.6 Morse
Range of spindle speed 12 changes, 25~2000r/min (30-600/600-3000rpm)
Feeds and threads  
Max. travel of compound rest 128mm(5")
Max. travel of cross slide 285mm(11-1/4")
Max. section of tool 25×25mm(1"×1")
Pitch thread of leadscrew 6mm or 4T.P.I.
Longitudinal feeds range 42 kinds, 0.031-1.7mm/rev(0.0011"-0.0633"/rev)
Cross feeds range 42 kinds, 0.014-0.784mm/rev(0.00033"-0.01837"/rev)
Metric threads range 41 kinds, 0.1-14mm
Inch threads range 60 kinds, 2-112T.P.I.
Diametrical pitches range 50 kinds, 4-112DP
Module pitches range 34 kinds, 0.1-7MP
Dia. of tailstock sleeve 60mm(2-5/16")
Travel of tailstock sleeve 128mm(5")
Taper of tailstock sleeve No.4 Morse
Power of main motor 5.5kw(7.5HP) 3PH
Power of coolant pump 0.1kw(1/8HP) 3PH
Dimension and weight
Overall dimension (L×W×H) cm 220×108×134 275×108×134 325×108×134 220×108×137 275×108×137 325×108×137
Packing size(L×W×H) cm 225×112×162 280×112×156 330×112×156 225×112×162 280×112×156 330×112×156
Net weight 1580kg 1745kg 1900kg 1645kg 1810kg 1965kg
Gross weight 1845kg 2050kg 2230kg 1910kg 2115kg 2295kg
October 23 2021